Thank you for writing to us. One of our executive will reach back to you through your submitted medium. In case there’s an urgency, feel free to connect over WhatsApp for faster response.
Prefer calling? Dial +9108042782997 (International callers) or 08042782997 (Indian callers).
Fasto A333 is a single component, super-fast curing and
super high strength anaerobic retaining, locking &
sealing compound. Fasto A333 is formulated for
retaining, locking & sealing cylindrical parts. Fasto A333
is also designed to augment the strength of press fit and
slip fit assemblies. Fasto A33 is specially designed for
cylindrical assemblies where power transmission is
important. Fasto A333 offers excellent heat resistance.
Once applied, parts slip together easily, lubricated by the
adhesives. Fasto A333 cures when confined in the
absence of air between close-fitting metal surfaces.
Fasto A333 prevents corrosion of assembling parts.
TYPICAL APPLICATIONS
Typical applications include retaining & locking of
sleeves, bushes, bearings, pulleys, sprockets, gears, etc
onto shafts. Fasto A333 is also used for retaining rotors,
plugs and many more cylindrical assemblies. It can also
be used for sealing & locking threads where very high
strength is required. Typically Fasto A333 can be used
in motors, pumps, gearboxes, turbines, compressors
generators, shower panels and many more industrial &
automotive assemblies.
Fasto SP110T is two part high performance non corrosive transparent silicone based potting compound.
Fasto SP110T is specially formulated for various applications where flexible & transparent potting is very imported during assembly. Due to flexibility & low hardness, the potting can be removed for repairing of circuits/components. Fasto SP110T is flowable compound and can be easily used. Fasto SP110T offers good electrical insulation and weatherability. Its performance at high temperature is also excellent.
TECHNOMELT KS 3566 is an edge banding hot melt adhesive with excellent bond strength, excellent heat resistance, and a wide operating window. It is suitable for various automatic edge banders.
Applications:
TECHNOMELT KS 3566 can be widely used to bond edges such as:
PVC
ABS
Melamine
Laminate
Wood veneer
Solid timber to MDF
Particle board
PRODUCT DESCRIPTION
LOCTITE UR 5152 provides the following product characteristics:
Technology Polyurethane
Product Type
PU Adhesive Cure Moisture cure
Condition
Solvent-free
Components
One-component Application General assembly
Color
Brown
LOCTITE UR 5152 is a solvent-free, moisture curing one component adhesive based on polyurethane. At room temperature and the required humidity in the joint sufficient strength will be obtained after approximately 2 to 4 hours.
For faster curing LOCTITE UR 5152 can be cured in a heated press. Maximum temperature must not exceed 70°C.
Application Areas
LOCTITE UR 5152 is used for the manufacture of sandwich elements with porous substrates (e.g., wood) which contain humidity.
The substrates can be bonded to one another or to metals, laminated panels, various plastics, rigid foams made of polystyrene, polyurethane and others.
HENKEL
product-detail-entry-exit
2002,Behind Union bank of India,Opp TVH height ,singanallur, Coimbatore-641005
