Thank you for writing to us. One of our executive will reach back to you through your submitted medium. In case there’s an urgency, feel free to connect over WhatsApp for faster response.
Prefer calling? Dial +9108042782997 (International callers) or 08042782997 (Indian callers).
Henkel offers a complete range of hotmelt adhesives based on different technologies (EVA, APAO, PO, PA, PP) to ensure reliable edge banding processes:
Economic hotmelts for all common applications
High bond strength on various edge band materials
High thermal stability (no charring)
Suitable for high-efficiency manufacturing
Lower cleaning cost thanks to clean running
Non-reactive Hotmelts – a new level of processing
Non-reactive hot melts are frequently used for edge banding and profile wrapping, flat lamination, assembly and sealing processes. Under the TECHNOMELT brand, Henkel is offering non-reactive hotmelts on EVA (Ethyl Vinyl Acetate), polyolefin (APAO) as well as polyamide (PA) base. In general, these thermoplastic hotmelts differ in terms of their adhesion and heat resistance. The clean processing, coupled with high machine speeds, fast setting and excellent aging behaviour make them first choice for furniture and building components.
Fasto SP110T is two part high performance non corrosive transparent silicone based potting compound.
Fasto SP110T is specially formulated for various applications where flexible & transparent potting is very imported during assembly. Due to flexibility & low hardness, the potting can be removed for repairing of circuits/components. Fasto SP110T is flowable compound and can be easily used. Fasto SP110T offers good electrical insulation and weatherability. Its performance at high temperature is also excellent.
TECHNOMELT KS 3566 is an edge banding hot melt adhesive with excellent bond strength, excellent heat resistance, and a wide operating window. It is suitable for various automatic edge banders.
Applications:
TECHNOMELT KS 3566 can be widely used to bond edges such as:
PVC
ABS
Melamine
Laminate
Wood veneer
Solid timber to MDF
Particle board
PRODUCT DESCRIPTION
LOCTITE UR 5152 provides the following product characteristics:
Technology Polyurethane
Product Type
PU Adhesive Cure Moisture cure
Condition
Solvent-free
Components
One-component Application General assembly
Color
Brown
LOCTITE UR 5152 is a solvent-free, moisture curing one component adhesive based on polyurethane. At room temperature and the required humidity in the joint sufficient strength will be obtained after approximately 2 to 4 hours.
For faster curing LOCTITE UR 5152 can be cured in a heated press. Maximum temperature must not exceed 70°C.
Application Areas
LOCTITE UR 5152 is used for the manufacture of sandwich elements with porous substrates (e.g., wood) which contain humidity.
The substrates can be bonded to one another or to metals, laminated panels, various plastics, rigid foams made of polystyrene, polyurethane and others.
HENKEL
product-detail-entry-exit
2002,Behind Union bank of India,Opp TVH height ,singanallur, Coimbatore-641005
