Fasto CA01 is a low-medium viscosity, fast curing, very high strength instant adhesive, specially formulated for bonding plastics. Fasto CA01 is suitable for bonding a very wide range of materials, including some porous ones, where very fast cure speed is required. TYPICAL APPLICATIONS Fasto CA01 is formulated for the bonding of plastics, rubbers, metals and other common substrates. It is recommended for use on close-fitting parts and smooth & even surfaces.

Fasto SP110T is two part high performance non corrosive transparent silicone based potting compound. Fasto SP110T is specially formulated for various applications where flexible & transparent potting is very imported during assembly. Due to flexibility & low hardness, the potting can be removed for repairing of circuits/components. Fasto SP110T is flowable compound and can be easily used. Fasto SP110T offers good electrical insulation and weatherability. Its performance at high temperature is also excellent.

PRODUCT DESCRIPTION LOCTITE UR 5152 provides the following product characteristics: Technology Polyurethane Product Type PU Adhesive Cure Moisture cure Condition Solvent-free Components One-component Application General assembly Color Brown LOCTITE UR 5152 is a solvent-free, moisture curing one component adhesive based on polyurethane. At room temperature and the required humidity in the joint sufficient strength will be obtained after approximately 2 to 4 hours. For faster curing LOCTITE UR 5152 can be cured in a heated press. Maximum temperature must not exceed 70°C. Application Areas LOCTITE UR 5152 is used for the manufacture of sandwich elements with porous substrates (e.g., wood) which contain humidity. The substrates can be bonded to one another or to metals, laminated panels, various plastics, rigid foams made of polystyrene, polyurethane and others.

Born2BondTM Light Lock MV is a low-odor, low-blooming, dual curing (contact and lightcuring), cyanoacrylate adhesive. It is designed for bonding applications that require fast fixturing coating or surface cure. The UV- and visible-light cure sensitivity allows rapid bonding through transparent parts and quick curing of light-exposed bulk or surface-coated areas, while the instant bonding capability ensures cure between opaque substrates (contact cure). KEY FEATURES → Dual cure formulation: instant and photo-cure → Fixture time in 60 s (without light exposure)* → Can be cured with visible and UV-LED light <5 sec → Long open time without activation → Dry to touch, tack free surface cure → Cure-on-demand of excess material released from bondlines → Bonds, fills, reconstructs and coats → Low odor, low blooming → Available in a range of viscosities: MV, HV and Gel

Fasto UV98E is a single component, general purpose,very low viscosity and economic grade UV adhesive thatcures to give a clear, flexible bond when exposed toUVA-light. It is especially suited for decorative glassbonding. The low viscosity of UV98E means it can wickinto preassembled parts.TYPICAL APPLICATIONSFasto UV98E is general purpose UV adhesive that hasbeen developed for bonding glass where non yellowing,transparent bonding is required.It is mainly developed for glass furniture industry wherehigher precision and transparency is required.PROPERTIES OF UNCURED MATERIALValueChemical type Urethane acrylic esterAppearance ClearSpecific Gravity 1.03Viscosity cPs1Typical Value 57Fixture Time2 (secs) 5Depth of Cure3 (mm) 2Compress Shear Strength4, N/mm2Glass 10Refractive Index 1.35Hardness ShoreD 48Shelf Life @ 21°C (months) 12Operating Temperature Range (°C)Continuous -50 to +110Intermittent -50 to +1301 Brookfield LVF, Spindle2 , 30rpm2 Glass slide fixture 10mW/cm2 @ 365 nm3 Cured for 30 secs @ 10mW/cm2 @ 365 nm4 Based on ASTM D2095-69, 180 secs cure @ 20mW/cm2 TYPICAL CURING PERFORMANCEGlass Slide Fixture Time in seconds, using Hg VapourLamp:10mW/cm2 <530mW/cm2 <3The rate of cure, depth of cure and surface tack of thecured adhesive will depend on the intensity of the UVlight, exposure time, and spectral output of the UV lightsource and light transmittance of the substrates to bebonded.Depths of cure up to 8mm can be achieved with highintensity lamps and long cure times. To achieve a fast,controlled, reproducible cure performance, the use ofhigh quality UV lamps is recommended.Cure Speed vs. IntensityFasto UV98E can be cured using sunlight. However, fora controlled, repeatable cure, UV lamps should be used.Cure speed vs. bond gapFasto UV98E is designed for bonding closely fitting glassand metal parts. UV98E can be used to a maximumdepth of ~3mm.CURING MECHANISMFasto UV98E is formulated to cure when exposed to UVradiation of 310nm or above.Chemical / Solvent ResistanceFasto UV98E exhibit excellent chemical resistance tomost oils and solvents including alcohols, methylatedspirit water. Fasto UV-curing adhesives are notrecommended for use in pure oxygen or chlorine lines.DIRECTIONS FOR USEFasto UV98E is very sensitive to UV-light. The adhesivesshould be applied to clean, dry parts. Ensure parts are clean, dry and free from oil and grease. Apply adhesiveto one surface. Once the adhesive is applied, the partscan be positioned correctly and then exposed to UV-lightto initiate curing. Ensure that the entire bond is exposed.Product can be hand applied from the bottle.Dispensing systems are also available for high volumeassembly applications. Feed lines for the dispensingsystem must have black, UV-opaque tubing to avoidadhesive curing in the lines. Please contact your Fastorepresentative for further advice on dispensing solutions.GENERAL INFORMATIONFor safe handling of this product consult the MaterialSafety Data Sheet.StorageStore in a cool area and out of direct sunlight.Refrigeration to 5°C gives optimum storage stability.PackagingBottles: 100 g, 250 g and 1 kg. Available in bulk for usewith dispensing system.Please note: When packed an air space above theProduct is vital to maintain stability.DATA RANGESThe data contained in this data sheet may be reportedas typical value and/or range. Values are based onactual test data and are verified on a regular basis.NOTESThe information contained herein is produced in goodfaith and is believed to be reliable but is for guidanceonly. Fasto India and its agents cannot assume liabilityor responsibility for results obtained in the use of itsproduct by persons whose methods are outside orbeyond our control. It is the user's responsibility todetermine the suitability of any of the products and methods of use or preparation prior to use mentioned in

Fasto TG100 is one part high performance siliconebased non curing thermally conductive paste. FastoTG100 is specially formulated for various applicationswhere heat transfer is very imported. Fasto TG100 isthick paste and can be easily applied with the helpspatula. Fasto TG100 has very good thermalconductivity with better electrical insulation andweatherability. Its performance at high temperature isalso excellent.TYPICAL APPLICATIONSFasto TG100 , thermally conductive paste, is very usefulwhere continuous heat transfer at elevated temperatureis required. It fills the air gap between contact surfaceand ensures quick heat dissipation. Fasto TG100 isgenerally used during assembly of LED lights and otherelectronic & electrical devices.PROPERTIES OF UNCURED MATERIALValueChemical type ProprietaryColour WhiteSpecific Gravity (g/ml) 1.93Thermal conductivity (W/m-k) 1.1Operating TemperatureContinuous (°C) -50 to 200Intermittent (°C) ~250Breakdown Voltage (kV/mm) > 5.1Shelf life (months) 12DIRECTIONS FOR USERemove all the rust, scale, dirt, dust, grease, oil, releaseagents, or other contaminants from the contact surfaces.Surfaces can also be cleaned using suitable Fastocleaner. Apply Fasto TG100 evenly with spatula suchthat no air remains between heat emitting surface andheat radiating contact surfaces. Apply Fasto TG100 in sufficient quantity and wipe out the excessive quantity.Excess quantity application is avoidable.Application temperature should be between 5°C and40°C and optimum temperature range is 15°C to 25°C.GENERAL INFORMATIONSAFETY PRECAUTIONSAvoid breathing of vapors. Forced local exhaust isrecommended to effectively minimize exposure. NIOSHapproved, organic vapor respirators and forced exhaustare recommended in confined areas, or when conditions(such as sanding, etc) may cause high vaporconcentrations.For safe handling of this product consult the MaterialSafety Data Sheet.StorageOptimal storage conditions are between 15°C and 25°C.Storage outside this temperature range can adverselyaffect product properties and may affect the stated shelflife.Packaging500 g, 1 kgLIMITATIONSThis product is not recommended for use in pure oxygenand/or oxygen rich systems and should not be selectedas a sealant against chlorine or other strong oxidizingmaterialsDATA RANGESThe data contained in this data sheet may be reportedas typical value and/or range. Values are based onactual test data and are verified on a regular basis.NOTESThe information contained herein is produced in goodfaith and is believed to be reliable but is for guidance only. Fasto India and its agents cannot assume liabilityor responsibility for results obtained in the use of itsproduct by persons whose methods are outside orbeyond our control. It is the user's responsibility todetermine the suitability of any of the products andmethods of use or preparation prior to use mentioned inour literature and furthermore the user's responsibility toobserve and adapt such precautions as may beadvisable for the protection of personnel and property inthe handling and use of any of our products.

Fasto CA22 is high performance low bloom medium viscosity high strength fast curing specially formulated modified Ethyl - Alcoxy Cyanoacrylate adhesive. Fasto CA22 is suitable for bonding various substrates like plastics, rubbers and few difficult to bond substrate like paper, leather etc. Fasto CA22 offers low blooming. TYPICAL APPLICATIONS Fasto CA22 is suitable for applications like LED lens, bulbs and other electrical & automotive assemblies where blooming is not required. Recommended for use on close-fitting parts, smooth and even surfaces.

Technologies : Cyanoacrylate Adhesives High Performance Multi Surface Fasto CA95 is a low-medium viscosity high strength specially formulated modified Methyl Cyanoacrylate adhesive. Fasto CA95 is suitable for bonding a very wide range of materials, including various metals, plastics, rubber, leather, composites etc.

Fasto A333 is a single component, super-fast curing and super high strength anaerobic retaining, locking & sealing compound. Fasto A333 is formulated for retaining, locking & sealing cylindrical parts. Fasto A333 is also designed to augment the strength of press fit and slip fit assemblies. Fasto A33 is specially designed for cylindrical assemblies where power transmission is important. Fasto A333 offers excellent heat resistance. Once applied, parts slip together easily, lubricated by the adhesives. Fasto A333 cures when confined in the absence of air between close-fitting metal surfaces. Fasto A333 prevents corrosion of assembling parts. TYPICAL APPLICATIONS Typical applications include retaining & locking of sleeves, bushes, bearings, pulleys, sprockets, gears, etc onto shafts. Fasto A333 is also used for retaining rotors, plugs and many more cylindrical assemblies. It can also be used for sealing & locking threads where very high strength is required. Typically Fasto A333 can be used in motors, pumps, gearboxes, turbines, compressors generators, shower panels and many more industrial & automotive assemblies.