High-performance, primerless, medium-viscosity sealant Fasto A750 is a single-component, primerless anaerobic pipe sealant with medium viscosity (5000 cps). It's designed for sealing threaded assemblies in applications such as chillers, compressors, fire-fighting equipment, pumps, and power packs . Rapid curing with broad temperature resistance The sealant achieves handling strength in 10 minutes and fully cures within 10 hours. It remains effective across a temperature range of −50 °C to +150 °C, making it suitable for various industrial environments . Versatile packaging and applications Fasto A750 is available in 50 ml and 250 ml packaging options. It's ideal for use in agricultural equipment, automotive applications, construction equipment, gearboxes, generators, harvesters, motors, submersible pumps, rotavators, steering assemblies, tractors, and transmissions

Technologies : Flange Sealants High Performance High Viscosity Fasto A475 is recommended for sealing rigid & semi-rigid metal flanges. It is high viscosity flange sealants that gives instant sealing. It can be used for sealing gearbox casings & side covers, pump housing, machinery covers, etc. It offers initial pressure resistance of 0.5 bar after 20 mins.

Fasto LockSeal HS is high strength, anaerobic thread locker & sealant. LockSeal HS cures when confined in the absence of air on close-fitting metal surfaces. LockSeal HS is slightly oil tolerant, so it will bond some ‘as received' parts, but best results are obtained with clean substrates. LockSeal HS to be used for locking & sealing where high strength opening is required. LockSeal HS prevents corrosion of assembled parts.TYPICAL APPLICATIONSFasto LockSeal HS is suitable for most medium and coarse threads. Fasto LockSeal HS is formulated to lock & seal all metric and imperial nuts and bolts, preventing vibration loosening and leakage through the threads. LockSeal HS is typically used in crushers, diesel generators, agricultural machines, Hydraulic assemblies, heavy engineering machineries and many more industrial & automobile assemblies.TYPICAL APPLICATIONSFasto LockSeal HS is suitable for most medium and coarse threads. Fasto LockSeal HS is formulated to lock & seal all metric and imperial nuts and bolts, preventing vibration loosening and leakage through the threads. LockSeal HS is typically used in crushers, diesel generators, agricultural machines, Hydraulic assemblies, heavy engineering machineries and many more industrial & automobile assemblies.TYPICAL CURING PERFORMANCECure speed vs. Temperature All figure relating to cure speed are tested at 21°C. Lower temperatures will result in slower cure. Heating the assembled part accelerates the curing process. Activator Fasto AP49 should be used when the temperature is less than 5°C. Cure speed vs. bond gap The size of the bond gap greatly affects the speed of cure of anaerobic adhesives. Bond gap varies with thread type and size of the fastener. The larger the gap between surfaces, the slower the cure speed. Maximum recommended gap for Fasto LockSeal HS is 0.15mm. Cure speed vs. Substrate Cure speed and strength vary according to the substrates. When used on mild steel and brass components Fasto LockSeal HS will reach full strength more rapidly than on more inert materials such as stainless steel and zinc dichromate. Anaerobic Adhesives only cure in the absence of air with metal part activation. Cure speed vs. Activator Where speed is too slow or the bond gap is very large, Fasto AP49 Activator may be used to accelerate cure speed. The use of an accelerator may reduce bond strength up to 30%. Fasto recommends testing on the parts of measure the effect. TYPICAL ENVIRONMENTAL RESISTANCE Hot strength Fasto LockSeal HS is suitable for use at temperatures up to 150°C. At 150°C the bond strength will be ~45% of the strength of at 21°C.Heat ageingFasto LockSeal HS retains over 90% full strength when heated to 100°C for 90 days then cooled and tested at 21°C. Chemical / Solvent Resistance Fasto LockSeal HS exhibit excellent chemical resistance to most oils and solvents including motor oil, leaded petrol, brake fluid, acetone, ethanol, propanol and water. Anaerobic adhesives and sealants are not recommended for use in pure oxygen and chlorine lines .

BOSS 122 RTV Silicone Sealant is an one part acetoxy cure adhesive sealant that is suitable for general construction sealing and adhesive applications. This product will adhere to clean metal, glass, many types of wood, silicone resins, vulcanized silicone rubber, ceramics and plastic surfaces. A primer may be required for optimum adhesion to some substrates. Cured sealant stays rubbery from -60°F to 400°F. BOSS 122 RTV silicone sealants ideally suited for sealing , glass windows, shopfront, aluminium joints, showcases, bus body building and automobiles. BENEFITS: Ease of use, one-part sealant, no mixing required. Good weatherability Virtually unaffected by sunlight, rain, ozone, and temperature extremes. Long life reliability, cured sealant stays rubbery from -25 to 110°C without tearing,cracking, drying out, or becoming brittle. Wide temperature gunnability can be applied in any season. Typical Properties Uncured Specific Gravity 0.97±2 Colors Clear, White, Black Sag/Slump NIL Tack-Free Time 10-15 min CureTime at 75°F (24°C) and 50% RH (3/8¢ thickness) 24 hours Extrusion Rate 275 g/min Cured Physical Elongation >400% Durometer Hardness, Shore A, points 17 Tensile Strength, Mpa 1.8 Dynamic Movement Capability Cycled at 1/8' hr.,1/8min.% ± 25 silicone sealant, high flow silicone sealant, ge sealant marine silicone, drum pump silicone sealant,,black silicone sealant waterproof, silicone sealant specialists, Anabond 666, silicone glazing sealant, food grade silicone sealant, silicone sealant specialties, silicone sealant drying time, structural silicone sealant, silicone rubber sealant, silicone sealant for fiberglass, aquarium silicone sealant, silicone boat sealant, flexible sanitary silicone sealant, high temp red Rtv silicone sealant, silicone sealant applicator tool, silicone joint sealant, silicone sealant for upvc windows, service temperature of silicone sealant, Silicone Sealant, Permatex High Temperature RTV Red, Boss 395 High Temperature Resistant Silicon Sealant, Boss 389 Weather Sealant, Silcon Sealant for ACP, Aluminum Composite Panel Sealant, Glass Sealant, Water Preventive Silicon, Dow Corning 732 siilcon Sealant, Engine Gasket Maker, Gear Box Sealant, Car Glass Silicon, Car Glass Adhesive, Automobile Silicon, Nail Free Silicon Sealant, Mirror Silicon Sealant, Mirror Adhesive, white Silicon Sealant, Black Silicon Sealant, H. T. Silicon Sealant, Anabond Silicon Sealants.

Fasto TG100 is one part high performance siliconebased non curing thermally conductive paste. FastoTG100 is specially formulated for various applicationswhere heat transfer is very imported. Fasto TG100 isthick paste and can be easily applied with the helpspatula. Fasto TG100 has very good thermalconductivity with better electrical insulation andweatherability. Its performance at high temperature isalso excellent.TYPICAL APPLICATIONSFasto TG100 , thermally conductive paste, is very usefulwhere continuous heat transfer at elevated temperatureis required. It fills the air gap between contact surfaceand ensures quick heat dissipation. Fasto TG100 isgenerally used during assembly of LED lights and otherelectronic & electrical devices.PROPERTIES OF UNCURED MATERIALValueChemical type ProprietaryColour WhiteSpecific Gravity (g/ml) 1.93Thermal conductivity (W/m-k) 1.1Operating TemperatureContinuous (°C) -50 to 200Intermittent (°C) ~250Breakdown Voltage (kV/mm) > 5.1Shelf life (months) 12DIRECTIONS FOR USERemove all the rust, scale, dirt, dust, grease, oil, releaseagents, or other contaminants from the contact surfaces.Surfaces can also be cleaned using suitable Fastocleaner. Apply Fasto TG100 evenly with spatula suchthat no air remains between heat emitting surface andheat radiating contact surfaces. Apply Fasto TG100 in sufficient quantity and wipe out the excessive quantity.Excess quantity application is avoidable.Application temperature should be between 5°C and40°C and optimum temperature range is 15°C to 25°C.GENERAL INFORMATIONSAFETY PRECAUTIONSAvoid breathing of vapors. Forced local exhaust isrecommended to effectively minimize exposure. NIOSHapproved, organic vapor respirators and forced exhaustare recommended in confined areas, or when conditions(such as sanding, etc) may cause high vaporconcentrations.For safe handling of this product consult the MaterialSafety Data Sheet.StorageOptimal storage conditions are between 15°C and 25°C.Storage outside this temperature range can adverselyaffect product properties and may affect the stated shelflife.Packaging500 g, 1 kgLIMITATIONSThis product is not recommended for use in pure oxygenand/or oxygen rich systems and should not be selectedas a sealant against chlorine or other strong oxidizingmaterialsDATA RANGESThe data contained in this data sheet may be reportedas typical value and/or range. Values are based onactual test data and are verified on a regular basis.NOTESThe information contained herein is produced in goodfaith and is believed to be reliable but is for guidance only. Fasto India and its agents cannot assume liabilityor responsibility for results obtained in the use of itsproduct by persons whose methods are outside orbeyond our control. It is the user's responsibility todetermine the suitability of any of the products andmethods of use or preparation prior to use mentioned inour literature and furthermore the user's responsibility toobserve and adapt such precautions as may beadvisable for the protection of personnel and property inthe handling and use of any of our products.

Fasto CA01 is a low-medium viscosity, fast curing, very high strength instant adhesive, specially formulated for bonding plastics. Fasto CA01 is suitable for bonding a very wide range of materials, including some porous ones, where very fast cure speed is required. TYPICAL APPLICATIONS Fasto CA01 is formulated for the bonding of plastics, rubbers, metals and other common substrates. It is recommended for use on close-fitting parts and smooth & even surfaces.

Fasto A333 is a single component, super-fast curing and super high strength anaerobic retaining, locking & sealing compound. Fasto A333 is formulated for retaining, locking & sealing cylindrical parts. Fasto A333 is also designed to augment the strength of press fit and slip fit assemblies. Fasto A33 is specially designed for cylindrical assemblies where power transmission is important. Fasto A333 offers excellent heat resistance. Once applied, parts slip together easily, lubricated by the adhesives. Fasto A333 cures when confined in the absence of air between close-fitting metal surfaces. Fasto A333 prevents corrosion of assembling parts. TYPICAL APPLICATIONS Typical applications include retaining & locking of sleeves, bushes, bearings, pulleys, sprockets, gears, etc onto shafts. Fasto A333 is also used for retaining rotors, plugs and many more cylindrical assemblies. It can also be used for sealing & locking threads where very high strength is required. Typically Fasto A333 can be used in motors, pumps, gearboxes, turbines, compressors generators, shower panels and many more industrial & automotive assemblies.

Fasto Lock Seal is a medium to high strength, anaerobic thread locker & sealant. Lock Seal cures when confined in the absence of air on close-fitting metal surfaces. Lock Seal is slightly oil tolerant, so it will bond some ‘as received’ parts, but best results are obtained with clean substrates. Lock Seal is thixotropic so prevents run off, dripping and migration after assembly. Lock Seal to be used for sealing where high strength opening is required. Lock Seal prevents corrosion of assembled parts. TYPICAL APPLICATIONS Fasto Lock Seal is suitable for most medium and coarse threads. Fasto Lock Seal is formulated to lock & seal all metric and imperial nuts and bolts, preventing vibration loosening and leakage through the threads. Lock Seal is typically used in crushers, diesel generators, agricultural machines, Hydraulic assemblies, heavy engineering machineries and many more industrial & automobile assemblies.

Fasto A143 is a general purpose, medium-high strength, very fast curing and high performance thixotropic anaerobic threadlocker. Fasto A143 is formulated to lock all metric and imperial nuts and bolts, preventing vibration loosening and leakage through the threads. A143 is oil tolerant, so it will bond ‘as received’ parts, but best results are obtained with clean substrates. The thixotropic nature of the product prevents run off, dripping and migration after assembly. The product cures when confined in the absence of air on close-fitting metal surfaces. TYPICAL APPLICATIONS Fasto A143 is suitable for most medium and coarse threaded screws, nuts and bolts. Fasto A143 is typically used on mounting bolts, housing screws, cap screw of industrial static & dynamic machines. Fasto A143 can also be used for threadlocking applications of automobile assemblies. A143 prevents corrosion of assembled parts