We are the leading supplier of a vast gamut of Floor Coating Products. Mentioned products are precisely fabricated using supreme grade factor inputs and the most advanced technology under the strict supervision of our quality experts. We offer these products in numerous specifications and dimensions to successfully meet the diverse requirements of our esteemed customers.
Epoxy Floor Coating
Two component, 1 mm self leveling epoxy floor coating. EITPL SLS–1mm provides a 1.0-1.5 mm abrasion resistance attractive floor coating which is chemical resistance and extremely easy to maintain.
Properties:
Method Of Application:
Properties:
- Hygienic
- Easy to Lay
- hard wearing
- Chemical Resistant
- Attractive
Material Properties:
Color | As per Shed Card |
Gloss | Glossy |
Thickness | 1.0-1.5 mm |
Mixing Ratio | 100 : 40 (R : H) |
Pot life at RT | 25-30 minutes |
Drying Time | Surface Dry - 4 Hrs |
Shelf Life | 06 Months |
Mechanical Properties:
Compressive strength | 75 N/ sq.mm |
Flexural strength | 50-55 N / sq.mm |
Tensile strength | 75-85 N / sq.mm |
Bond strength to concrete substrate | > cohesive strength of concrete |
Hardness Shore D | 75-80 |
Abrasion Resistance | Excellent |
Perforating Resistance | Very Good |
Method Of Application:
- Surface Preparation
- A sound, clean and dry is absolutely essential for successful coating application and in ensuring maximum bonding between the substrate and flooring system
- Concrete surface should be freed from latencies and dust by sand blasting. Thorough abrading with hard wire brush
- Chemical etching using 15% hydrochloric acid solution should be employed. The solution is applied by brush over the surface liberally and left in contact for 15 minutes. This is then washed off with plenty of water followed by drying with hot air
- For good adhesion, cleanliness, roughness and dryness of the surface are essential. Unless these are ensured by proper surface preparation a successful performance is not possible
- Apply Epoxy primer. All cracks present based on the depth of crack should be filled either with epoxy putty or mortar
