Description • Hybrid adhesive sealant based on MS base. • Ultra transparent, crystal joint and free of isocyanates and solvents • excellent adhesion to wide range of construction and automotive substrates • Adheres without primer to most of the substrates. • Works on damp condition, UV resistance and Paintable • Neutral, non-corrosive and applicable on alkaline surface • Suitable for both internal and external applications, odourless and chemical resistance • Bonding skirting-boards, panels, plates made of synthetic materials, glaze, terracotta, elements made of synthetic materials, wood, metals, metal plates, for all types of surfaces in building such as brick, concrete, gypsum, plasters • Shore A hardness: 45 • Skin formation time: 5-50 minutes • Product meets requirements of EN 15651-1:2012 F-EXT-INT-CC • Product meets requirements of EN 15651-3:2012 S Class S 2

Henkel offers a complete range of hotmelt adhesives based on different technologies (EVA, APAO, PO, PA, PP) to ensure reliable edge banding processes: Economic hotmelts for all common applications High bond strength on various edge band materials High thermal stability (no charring) Suitable for high-efficiency manufacturing Lower cleaning cost thanks to clean running Non-reactive Hotmelts – a new level of processing Non-reactive hot melts are frequently used for edge banding and profile wrapping, flat lamination, assembly and sealing processes. Under the TECHNOMELT brand, Henkel is offering non-reactive hotmelts on EVA (Ethyl Vinyl Acetate), polyolefin (APAO) as well as polyamide (PA) base. In general, these thermoplastic hotmelts differ in terms of their adhesion and heat resistance. The clean processing, coupled with high machine speeds, fast setting and excellent aging behaviour make them first choice for furniture and building components.

Simson ISR 70-03 is a high quality elastic sealant / adhesive based on Silyl Modified Polymers (SMP). It is suitable as adhesive or sealant for structures in industrial applications requiring high strength. Simson ISR 70-03 has excellent resistance to UV, weather and temperature and is free of solvents, isocyanates and silicone. It exhibits excellent adhesion performance on a wide variety of substrates (minimal or no pretreatment necessary) and can be overpainted with common industrial paints. Simson ISR 70-03 used with the Dual SMP® technology, guarantees an increased and controlled cure speed and reliability in the production process and extends the application possibilities. APPLICATIONS - Elastic bondings and sealings in e.g. bus-, caravan-, train- and truck construction. - Bonding and sealing of sunroof systems. - Bonding of roofs on busses, trains, trucks. - Bonding of corner profiles of aluminium or polyester on trailers. - Bonding of polyester parts on metal frames. - Bonding of floor systems. - Sealing welded seams

Product descriptionMoisture curing 1-component polyurethane adhesive. Suitable for general assembly work, joint gluing in the workshop and at the building site, suitable for many different materials (Test bonds mandatory).Product features Without solvent and water Short open time High water resistance in compliance with D4 as per EN 204 High heat resistance Good chemical resistance Product Information

• Hybrid adhesive sealant based on MS base. • Ultra transparent, crystal joint and free of isocyanates and solvents • excellent adhesion to wide range of construction and automotive substrates • Adheres without primer to most of the substrates. • Works on damp condition, UV resistance and Paintable • Neutral, non-corrosive and applicable on alkaline surface • Suitable for both internal and external applications, odourless and chemical resistance • Bonding skirting-boards, panels, plates made of synthetic materials, glaze, terracotta, elements made of synthetic materials, wood, metals, metal plates, for all types of surfaces in building such as brick, concrete, gypsum, plasters • Shore A hardness: 45 • Skin formation time: 5-50 minutes • Product meets requirements of EN 15651-1:2012 F-EXT-INT-CC • Product meets requirements of EN 15651-3:2012 S Class S 2

ISR 70-03 is a high quality elastic sealant / adhesive based on Silyl Modified Polymers (SMP). It is suitable as adhesive or sealant for structures in industrial applications requiring high strength. Simson ISR 70-03 has excellent resistance to UV, weather and temperature and is free of solvents, isocyanates and silicone. It exhibits excellent adhesion performance on a wide variety of substrates (minimal or no pretreatment necessary) and can be overpainted with common industrial paints. Simson ISR 70-03 used with the Dual SMP® technology, guarantees an increased and controlled cure speed and reliability in the production process and extends the application possibilities.

Fasto UV98E is a single component, general purpose,very low viscosity and economic grade UV adhesive thatcures to give a clear, flexible bond when exposed toUVA-light. It is especially suited for decorative glassbonding. The low viscosity of UV98E means it can wickinto preassembled parts.TYPICAL APPLICATIONSFasto UV98E is general purpose UV adhesive that hasbeen developed for bonding glass where non yellowing,transparent bonding is required.It is mainly developed for glass furniture industry wherehigher precision and transparency is required.PROPERTIES OF UNCURED MATERIALValueChemical type Urethane acrylic esterAppearance ClearSpecific Gravity 1.03Viscosity cPs1Typical Value 57Fixture Time2 (secs) 5Depth of Cure3 (mm) 2Compress Shear Strength4, N/mm2Glass 10Refractive Index 1.35Hardness ShoreD 48Shelf Life @ 21°C (months) 12Operating Temperature Range (°C)Continuous -50 to +110Intermittent -50 to +1301 Brookfield LVF, Spindle2 , 30rpm2 Glass slide fixture 10mW/cm2 @ 365 nm3 Cured for 30 secs @ 10mW/cm2 @ 365 nm4 Based on ASTM D2095-69, 180 secs cure @ 20mW/cm2 TYPICAL CURING PERFORMANCEGlass Slide Fixture Time in seconds, using Hg VapourLamp:10mW/cm2 <530mW/cm2 <3The rate of cure, depth of cure and surface tack of thecured adhesive will depend on the intensity of the UVlight, exposure time, and spectral output of the UV lightsource and light transmittance of the substrates to bebonded.Depths of cure up to 8mm can be achieved with highintensity lamps and long cure times. To achieve a fast,controlled, reproducible cure performance, the use ofhigh quality UV lamps is recommended.Cure Speed vs. IntensityFasto UV98E can be cured using sunlight. However, fora controlled, repeatable cure, UV lamps should be used.Cure speed vs. bond gapFasto UV98E is designed for bonding closely fitting glassand metal parts. UV98E can be used to a maximumdepth of ~3mm.CURING MECHANISMFasto UV98E is formulated to cure when exposed to UVradiation of 310nm or above.Chemical / Solvent ResistanceFasto UV98E exhibit excellent chemical resistance tomost oils and solvents including alcohols, methylatedspirit water. Fasto UV-curing adhesives are notrecommended for use in pure oxygen or chlorine lines.DIRECTIONS FOR USEFasto UV98E is very sensitive to UV-light. The adhesivesshould be applied to clean, dry parts. Ensure parts are clean, dry and free from oil and grease. Apply adhesiveto one surface. Once the adhesive is applied, the partscan be positioned correctly and then exposed to UV-lightto initiate curing. Ensure that the entire bond is exposed.Product can be hand applied from the bottle.Dispensing systems are also available for high volumeassembly applications. Feed lines for the dispensingsystem must have black, UV-opaque tubing to avoidadhesive curing in the lines. Please contact your Fastorepresentative for further advice on dispensing solutions.GENERAL INFORMATIONFor safe handling of this product consult the MaterialSafety Data Sheet.StorageStore in a cool area and out of direct sunlight.Refrigeration to 5°C gives optimum storage stability.PackagingBottles: 100 g, 250 g and 1 kg. Available in bulk for usewith dispensing system.Please note: When packed an air space above theProduct is vital to maintain stability.DATA RANGESThe data contained in this data sheet may be reportedas typical value and/or range. Values are based onactual test data and are verified on a regular basis.NOTESThe information contained herein is produced in goodfaith and is believed to be reliable but is for guidanceonly. Fasto India and its agents cannot assume liabilityor responsibility for results obtained in the use of itsproduct by persons whose methods are outside orbeyond our control. It is the user's responsibility todetermine the suitability of any of the products and methods of use or preparation prior to use mentioned in

Fasto SM30 is a one-part UL certified, PV Grade, all weather, highly flexible, neutral cure, non-corrosive RTV Silicone Adhesive Sealant. Being non-corrosive, it does not corrode circuit & contacts. It has excellent resistance to weathering, UV Radiation, vibration, moisture, ozone, air borne pollutants, temperature extremes, cleaning detergents, etc. and ensures that it lasts the life of panel. UL File No. E526945. Fasto SM30 has passed RoHS. TYPICAL APPLICATIONS Fasto SM30 is suitable for bonding & sealing aluminium, glass, plastic & other engineering substrates of Solar Panels. It is Its high resilience ensures better expansion & contraction management due to extreme weather conditions. Also, it does not corrode connections in JBs.

Fasto S982 is a one part, low odor, oil tolerant, all weather, highly flexible, neutral cure, non corrosive, high performance RTV Silicone sealant. It can be used for sealing, bonding and glazing applications. It is suitable for electrical, mechanical and automotive applications. TYPICAL APPLICATIONS Fasto S982 is suitable for bonding and sealing gear box & pump flanges, air conditioning ducts, oil sumps, solar panels, ceramics and many more electrical & mechanical equipment and machines. It is suitable for bonding & sealing steel, aluminium, composites, glass, plastics, rubber, concrete, etc