• One component self expandable polyurethane foam, application with gun and Variable extrusion rate • Sealing for door/window fittings, filling cracks, gapes, holes. sealing roof, wall, floor joints • Thermal insulation. acoustic insulation • B1 flammability class (DIN 4102). Bs 1 d0 flammability class (EN 13501-1:2008) • 240 minutes fire resistance (EN 1366-4:2008) • Yield 42 liters (56 times expanding) • Tack free time : 8-10 minutes

ADINO PUF 1K 1C DIY PU FOAMPOLYURETHANE FOAM SEALANT • One component self expandable polyurethane foam. application with straw/adapter, DIY grade • Sealing for door/window fittings, filling cracks, gapes, holes. sealing roof, wall, floor joints • Thermal insulation. acoustic insulation • B3 flammability class (DIN 4102) • F flammability class (EN 13501-1:2008) • Yield 40 litres (53 times expanding) • Tack free time : 10-12 minutes

Fireplace sealing mass based on water glass, intended for repairing and sealing in places exposed to extremely high temperatures; chimney, fire place sealant. • Resistant to direct flame • Resistant to high temperatures up to +1500°C (cured sealant – tested after 4 weeks at 23 °C and 50% relative humidity) • Excellent adhesion to wide range of construction substrates • Repairs of elements exposed to fire, not subjected to tensions • Meets hygiene standards

• One-component mounting adhesive based on synthetic rubber in organic solvents. • For bonding of wide range of building materials to most typical surfaces, such as: concrete, plaster, chipboard, wood, plaster board, brick • Bonding of baseboards, plinths, doorsteps, floor panels, ceramic tiles • Bonding decorative elements made of wood, gypsum, cork, chipboard, metal, stones, foamed polystyrene • Bonding of mineral and glass wool • Clamping of carpets and PVC floor coverings • Colour: biege • Solid content: 75% • Density [g/ml]: 1,25 ± 0,05 • WorkIing time (depending on ambient conditions): 10-15 minutes

One-component Wood D4 adheisve • Viscosity: 3000-9000 cps. consistent viscosity and mileage • Solid content: 60% • Meets EN 204/405: D4 standard. high temperature resistance, according to WATT 91 • Durable joint. neutral odour. solvent free • Colourless joint • Bonding all kinds of wood (including wood subject to humidity, e.g. kitchen, bathroom, garden furniture) recommended for applications requiring humidity resistance. It is recommended for bonding of doors, windows, stairs, garden furniture and other wood elements exposed to weather conditions or high humidity

SPEB-7 Premium SR-911 is a high bond multipurpose adhesive with a high cohesive strength. Applied in the below industries and many more where the bond strength required is high or the application is critical. cohesive strength. Applied in the below industries and many more where the bond strength required is high or the application is critical Application: Foam / rubber foam / rexine / leather / fibre / glass / ceramic/ Coir / canvas / wood / plywood / metal / veneer /Laminated plastics / Cork / wood / chipboard / concrete / stone to each other PVC flooring / Woven carpets/ Vinyl Flooring / vinyl skirting on the wall Cloth to wood/ aluminum used for making gift/ jewelry boxes. Quick and strong bonding for Exhibition stands installation Products also find usage in Car & Gus Interiors Application Industries: Laminate to Wood Plywood bonding Carpet Industry Footwear Industry Automobile Industry Exhibition Stand Building Method of Use: Ensure that the surface to be bonded is clean and dry. Clean the surface thoroughly to remove any dirt, grease etc. Apply the adhesive on both surfaces evenly and allow drying for 5-10 mins or until just ‘c*’y to touch". Now join both surfaces and press well for about 6-8 hours to get a strong and perfect bond. Care should be taken to avoid trapping of air during joining Note: Workable bond strength of the joint will be achieved after sometime, but maximum strength will occur only after the solvent has completely evaporated which takes between 12-24 hours depending on the porosity of the surface Precautions: SPB-7 PREMIUM SR-911 should be stirred well before use. The lid of the container must be tightly closed after use and should be kept away from heat and direct sunlight.

Boss 333 is a ready-to-use, multi-purpose, polyurethane foam that expands to three times its original volume on contact with air. The expanding action fills holes, cracks and gaps more completely than standard caulks. Boss 333 has excellent insulting properties and adhesion to virtually all building materials. Typical Properties: Density, lbs./ft.3 ASTM D 1622 1.3-1.8 Compression Strength, psi ASTM D 1621 11 Tensile Strength, psi ASTM D 1623 33 Shear Strength, psi ASTM C 273 18 Shear Strain, psi ASTM C 273 57 Closed Cell Content, % ASTM D 2856 70 Thermal Resistance, R value ASTM C518 5.4”/1” Water Vapour Transmission, perm inch ASTM E 96 3.3 Maximum Service Temp 240oF(115.6oC) Ideal Application Temp 60oF to 90oF(15.6oC to 32.2oC) UL Classified ASTM E 84 9.8 Flame spread 20 Smoke Developed 25

PRODUCT DESCRIPTION LOCTITE UR 5152 provides the following product characteristics: Technology Polyurethane Product Type PU Adhesive Cure Moisture cure Condition Solvent-free Components One-component Application General assembly Color Brown LOCTITE UR 5152 is a solvent-free, moisture curing one component adhesive based on polyurethane. At room temperature and the required humidity in the joint sufficient strength will be obtained after approximately 2 to 4 hours. For faster curing LOCTITE UR 5152 can be cured in a heated press. Maximum temperature must not exceed 70°C. Application Areas LOCTITE UR 5152 is used for the manufacture of sandwich elements with porous substrates (e.g., wood) which contain humidity. The substrates can be bonded to one another or to metals, laminated panels, various plastics, rigid foams made of polystyrene, polyurethane and others.

1K part polyurethane adhesive that hardens by humidity or spraying with a fine water mist. The good relationship between open time and press time. LOCTITE UR 7221 is a solvent-free, moisture curing one component adhesive based on polyurethane. Designed for manufacturing of sandwich elements of porous substrates, which contain humidity. The substrates can be bonded to one another or to metals, laminated panels, various plastics, rigid foam made of polystyrene, polyurethane, PVC and others. At room temperature and the required humidity in the joint sufficient strength will be obtained after approximately 2 to 4 hours. For faster curing LOCTITE UR 7221 can be cured in a heated press. Maximum temperature must not exceed 70°C.