Products

BOSS 122 RTV Silicone Sealant is an one part acetoxy cure adhesive sealant that is suitable for general construction sealing and adhesive applications. This product will adhere to clean metal, glass, many types of wood, silicone resins, vulcanized silicone rubber, ceramics and plastic surfaces. A primer may be required for optimum adhesion to some substrates. Cured sealant stays rubbery from -60°F to 400°F. BOSS 122 RTV silicone sealants ideally suited for sealing , glass windows, shopfront, aluminium joints, showcases, bus body building and automobiles. BENEFITS: Ease of use, one-part sealant, no mixing required. Good weatherability Virtually unaffected by sunlight, rain, ozone, and temperature extremes. Long life reliability, cured sealant stays rubbery from -25 to 110°C without tearing,cracking, drying out, or becoming brittle. Wide temperature gunnability can be applied in any season. Typical Properties Uncured Specific Gravity 0.97±2 Colors Clear, White, Black Sag/Slump NIL Tack-Free Time 10-15 min CureTime at 75°F (24°C) and 50% RH (3/8¢ thickness) 24 hours Extrusion Rate 275 g/min Cured Physical Elongation >400% Durometer Hardness, Shore A, points 17 Tensile Strength, Mpa 1.8 Dynamic Movement Capability Cycled at 1/8' hr.,1/8min.% ± 25 silicone sealant, high flow silicone sealant, ge sealant marine silicone, drum pump silicone sealant,,black silicone sealant waterproof, silicone sealant specialists, Anabond 666, silicone glazing sealant, food grade silicone sealant, silicone sealant specialties, silicone sealant drying time, structural silicone sealant, silicone rubber sealant, silicone sealant for fiberglass, aquarium silicone sealant, silicone boat sealant, flexible sanitary silicone sealant, high temp red Rtv silicone sealant, silicone sealant applicator tool, silicone joint sealant, silicone sealant for upvc windows, service temperature of silicone sealant, Silicone Sealant, Permatex High Temperature RTV Red, Boss 395 High Temperature Resistant Silicon Sealant, Boss 389 Weather Sealant, Silcon Sealant for ACP, Aluminum Composite Panel Sealant, Glass Sealant, Water Preventive Silicon, Dow Corning 732 siilcon Sealant, Engine Gasket Maker, Gear Box Sealant, Car Glass Silicon, Car Glass Adhesive, Automobile Silicon, Nail Free Silicon Sealant, Mirror Silicon Sealant, Mirror Adhesive, white Silicon Sealant, Black Silicon Sealant, H. T. Silicon Sealant, Anabond Silicon Sealants.

1-part polyurethane adhesive that hardens by humidity or spraying with a fine water mist. Good relationship between open time and press time. LOCTITE UR 7221 is a solvent-free, moisture curing one component adhesive based on polyurethane. Designed for manufacturing of sandwich elements of porous substrates, which contain humidity. The substrates can be bonded to one another or to metals, laminated panels, various plastics, rigid foam made of polystyrene, polyurethane, PVC and others. At room temperature and the required humidity in the joint sufficient strength will be obtained after approximately 2 to 4 hours. For faster curing LOCTITE UR 7221 can be cured in a heated press. Maximum temperature must not exceed 70°C.

Boss PU 25 is a fast-curing one-component polyurethane sealant that turns into a flexible, durable and resistant elastomeric seam and has a very good adhesion to most industrial materials. Boss PU 50 has high elasticity and excellent tear, vibration and weathering resistance. Easy to apply, it adheres without primer to the most common substrates such as glass, anodized aluminum, lacquered metal, wood, FRP and concrete. Specifications of Boss PU 50 Polyurethane Sealant meets or exceeds the following: TT-S-00230C9(Type ll) Class A ASTM C-920 Type S Grade NS Class 25, Use-NT, A and M Typical Properties: Specific Gravity 1.2-1.3 Skin formation time 40mins Curing speed 4mm per 24 hours Shore hardness Approx.50 Elongation at break >700% Tensile Strength 2.3N/mm2 Tear Strength 8N/mm2 Color Black, Grey & White Features: Primer less adhesion to most substrates Excellent weather ability Paintable Tools Easily

SPEB-7 Premium SR-911 is a high bond multipurpose adhesive with a high cohesive strength. Applied in the below industries and many more where the bond strength required is high or the application is critical. cohesive strength. Applied in the below industries and many more where the bond strength required is high or the application is critical Application: Foam / rubber foam / rexine / leather / fibre / glass / ceramic/ Coir / canvas / wood / plywood / metal / veneer /Laminated plastics / Cork / wood / chipboard / concrete / stone to each other PVC flooring / Woven carpets/ Vinyl Flooring / vinyl skirting on the wall Cloth to wood/ aluminum used for making gift/ jewelry boxes. Quick and strong bonding for Exhibition stands installation Products also find usage in Car & Gus Interiors Application Industries: Laminate to Wood Plywood bonding Carpet Industry Footwear Industry Automobile Industry Exhibition Stand Building Method of Use: Ensure that the surface to be bonded is clean and dry. Clean the surface thoroughly to remove any dirt, grease etc. Apply the adhesive on both surfaces evenly and allow drying for 5-10 mins or until just ‘c*’y to touch“. Now join both surfaces and press well for about 6-8 hours to get a strong and perfect bond. Care should be taken to avoid trapping of air during joining Note: Workable bond strength of the joint will be achieved after sometime, but maximum strength will occur only after the solvent has completely evaporated which takes between 12-24 hours depending on the porosity of the surface Precautions: SPB-7 PREMIUM SR-911 should be stirred well before use. The lid of the container must be tightly closed after use and should be kept away from heat and direct sunlight.

Henkel offers a complete range of hotmelt adhesives based on different technologies (EVA, APAO, PO, PA, PP) to ensure reliable edge banding processes: Economic hotmelts for all common applications High bond strength on various edge band materials High thermal stability (no charring) Suitable for high-efficiency manufacturing Lower cleaning cost thanks to clean running Non-reactive Hotmelts – a new level of processing Non-reactive hot melts are frequently used for edge banding and profile wrapping, flat lamination, assembly and sealing processes. Under the TECHNOMELT brand, Henkel is offering non-reactive hotmelts on EVA (Ethyl Vinyl Acetate), polyolefin (APAO) as well as polyamide (PA) base. In general, these thermoplastic hotmelts differ in terms of their adhesion and heat resistance. The clean processing, coupled with high machine speeds, fast setting and excellent aging behaviour make them first choice for furniture and building components.

AQUENCE waterbased adhesives for assembly can be used within many application fields, e.g. edge to edge gluing, dowel insertion, mitre gluing, tongue and groove joints, finger jointing and still more: Excellent for solid wood bonding Product range for all water resistance classes (D1 – D4; EPI) For all kinds of wood species Solutions for all press systems (cold press, hot press, radio frequency press, Micro wave etc.) Quality adhesive solutions for wood assembly Wood assembly employes a multitude of applications, among others edge gluing, dowel insertion, miter gluing, tongue and groove joints and finger jointing. Furthermore, it involves wood, veneer, particle board, MDF and many other materials. Henkel is your reliable partner, providing first-class PUR hotmelts, non-reactive hotmelts, liquid PU and waterbased adhesives for wood assembly

Fasto UVM 21 backed ourselves with sound amenities and talented personnel, we have emerged as one of the leading firms of superior quality of UV Adhesive that provides seal against air, steam moist, fluids and lubricants. This adhesive is processed by using quality tested chemicals and sophisticated tools under the guidance of skilled professionals. Clients can avail this adhesive in bulk quantities to meet the exact requirements of the clients' specifications. Fasto UVM21 is high performance very and high strength medical grade UV adhesive. It is suitable for bonding various medical devices and grades of plastics like polycarbonate, acrylic, thermoplastics, etc Features: Very high strength Medical grade Long lasting adhesiveness Can stand with high temperature Easy to apply

ADINO SEAL HTR 1500 HEAT SPECIAL 1500ACRYLIC SEALANT • Fireplace sealing mass based on water glass, intended for repairing and sealing in places exposed to extremely high temperatures; chimney, fire place sealant. • Resistant to direct flame • Resistant to high temperatures up to +1500°C (cured sealant - tested after 4 weeks at 23 °C and 50% relative humidity) • Excellent adhesion to wide range of construction substrates • Repairs of elements exposed to fire, not subjected to tensions • Meets hygiene standards

Fireplace sealing mass based on water glass, intended for repairing and sealing in places exposed to extremely high temperatures; chimney, fire place sealant. • Resistant to direct flame • Resistant to high temperatures up to +1500°C (cured sealant – tested after 4 weeks at 23 °C and 50% relative humidity) • Excellent adhesion to wide range of construction substrates • Repairs of elements exposed to fire, not subjected to tensions • Meets hygiene standards

• One component self expandable polyurethane foam, application with gun and Variable extrusion rate • Sealing for door/window fittings, filling cracks, gapes, holes. sealing roof, wall, floor joints • Thermal insulation. acoustic insulation • B1 flammability class (DIN 4102). Bs 1 d0 flammability class (EN 13501-1:2008) • 240 minutes fire resistance (EN 1366-4:2008) • Yield 42 liters (56 times expanding) • Tack free time : 8-10 minutes

We are actively engaged in manufacturing, exporting and supplying an excellent range of UV Adhesive is utilized in a number of industrial processes because of their excellent properties, including exceptional stability and high transparency. Apart from this, the entire range of adhesive is processed by using high grade chemicals and latest technology. To ensure quality, our offered adhesive is stringently tested on various parameters by our quality controllers. Fasto UVE31 is high performance very high strength and medium viscosity UV adhesive. Excellent depth of cure makes it suitable for potting & encapsulation applications. Features: Very high strength Electronics grade Unsurpassed bonding strength Highly effective Accurate composition

Item Code: Fasto-S960 Fasto S960 is a one part, high performance, high temperature, highly flexible, acetoxy silicone compound. Fasto S960 is suitable for bonding and sealing gear box flanges, air conditioning ducts, street lights, solar panels, pipe flanges, insulation sealing, refrigeration units, radiators, boiler joints, gaskets & o-rings and many more electrical, mechanical equipment & machines and electronic appliance. Features: High temperature High performance up 300'C User friendly Highly flexible All weather