BOSS 122 RTV Silicone Sealant is an one part acetoxy cure adhesive sealant that is suitable for general construction sealing and adhesive applications. This product will adhere to clean metal, glass, many types of wood, silicone resins, vulcanized silicone rubber, ceramics and plastic surfaces. A primer may be required for optimum adhesion to some substrates. Cured sealant stays rubbery from -60°F to 400°F. BOSS 122 RTV silicone sealants ideally suited for sealing , glass windows, shopfront, aluminium joints, showcases, bus body building and automobiles. BENEFITS: Ease of use, one-part sealant, no mixing required. Good weatherability Virtually unaffected by sunlight, rain, ozone, and temperature extremes. Long life reliability, cured sealant stays rubbery from -25 to 110°C without tearing,cracking, drying out, or becoming brittle. Wide temperature gunnability can be applied in any season. Typical Properties Uncured Specific Gravity 0.97±2 Colors Clear, White, Black Sag/Slump NIL Tack-Free Time 10-15 min CureTime at 75°F (24°C) and 50% RH (3/8¢ thickness) 24 hours Extrusion Rate 275 g/min Cured Physical Elongation >400% Durometer Hardness, Shore A, points 17 Tensile Strength, Mpa 1.8 Dynamic Movement Capability Cycled at 1/8' hr.,1/8min.% ± 25 silicone sealant, high flow silicone sealant, ge sealant marine silicone, drum pump silicone sealant,,black silicone sealant waterproof, silicone sealant specialists, Anabond 666, silicone glazing sealant, food grade silicone sealant, silicone sealant specialties, silicone sealant drying time, structural silicone sealant, silicone rubber sealant, silicone sealant for fiberglass, aquarium silicone sealant, silicone boat sealant, flexible sanitary silicone sealant, high temp red Rtv silicone sealant, silicone sealant applicator tool, silicone joint sealant, silicone sealant for upvc windows, service temperature of silicone sealant, Silicone Sealant, Permatex High Temperature RTV Red, Boss 395 High Temperature Resistant Silicon Sealant, Boss 389 Weather Sealant, Silcon Sealant for ACP, Aluminum Composite Panel Sealant, Glass Sealant, Water Preventive Silicon, Dow Corning 732 siilcon Sealant, Engine Gasket Maker, Gear Box Sealant, Car Glass Silicon, Car Glass Adhesive, Automobile Silicon, Nail Free Silicon Sealant, Mirror Silicon Sealant, Mirror Adhesive, white Silicon Sealant, Black Silicon Sealant, H. T. Silicon Sealant, Anabond Silicon Sealants.

Fasto S982 is a one part, low odor, oil tolerant, all weather, highly flexible, neutral cure, non corrosive, high performance RTV Silicone sealant. It can be used for sealing, bonding and glazing applications. It is suitable for electrical, mechanical and automotive applications. TYPICAL APPLICATIONS Fasto S982 is suitable for bonding and sealing gear box & pump flanges, air conditioning ducts, oil sumps, solar panels, ceramics and many more electrical & mechanical equipment and machines. It is suitable for bonding & sealing steel, aluminium, composites, glass, plastics, rubber, concrete, etc

NP Silicone Sealant is a one part, all weather, neutral cure, noncorrosiveRTV Silicone sealant. Being non-corrosive, itdoes not corrode metal and protect surfaces. It has goodresistance to weathering, UV Radiation, moisture,ozone, air borne pollutants, temperature extremes,cleaning detergents, etc. It can be used for sealing,bonding and glazing applications. It is suitable forelectrical, mechanical, automobile and constructionapplications. It is suitable for bonding and sealing varioussubstrates. Typical applications are air conditioningducts, expansion joints, ACP sheets, bus body, streetlights, signing boards, solar panels, insulators, JBs andmany more electrical & mechanical equipment andmachines.It is suitable for bonding & sealing steel, aluminum,composites, ceramics, glass, plastics, rubber, concrete,etc.

Choose our silicone sealant adhesive for strong bonding and sealing. As trusted suppliers, we offer high-quality silicone sealant adhesive designed for durability and flexibility in various applications. Ideal for construction, plumbing, and automotive uses, this adhesive provides excellent water resistance and adhesion to multiple surfaces. Available in different formulations to meet your specific needs

General Purpose Silicone Silicone is a one part, all weather, highly flexible,acetoxy, economical grade, multipurpose RTV Siliconesealant. It can be used for sealing, bonding and glazingapplications. It is suitable for electrical, mechanical,automobile and construction applications. It is suitable for bonding and sealing gear boxflanges, air conditioning ducts, bus body, street lights,junction boxes, signing boards, solar panels and manymore electrical & mechanical equipment and machines.Fasto S950 can also be used for sealing and jointingconstruction joints, windows, roofs, floors, façade etc.It is suitable for bonding & sealing steel, aluminium,composites, glass, plastics, rubber, concrete, etc.

Boss PU 25 is a fast-curing one-component polyurethane sealant that turns into a flexible, durable and resistant elastomeric seam and has a very good adhesion to most industrial materials. Boss PU 50 has high elasticity and excellent tear, vibration and weathering resistance. Easy to apply, it adheres without primer to the most common substrates such as glass, anodized aluminum, lacquered metal, wood, FRP and concrete. Specifications of Boss PU 50 Polyurethane Sealant meets or exceeds the following: TT-S-00230C9(Type ll) Class A ASTM C-920 Type S Grade NS Class 25, Use-NT, A and M Typical Properties: Specific Gravity 1.2-1.3 Skin formation time 40mins Curing speed 4mm per 24 hours Shore hardness Approx.50 Elongation at break >700% Tensile Strength 2.3N/mm2 Tear Strength 8N/mm2 Color Black, Grey & White Features: Primer less adhesion to most substrates Excellent weather ability Paintable Tools Easily

Fasto TG100 is one part high performance siliconebased non curing thermally conductive paste. FastoTG100 is specially formulated for various applicationswhere heat transfer is very imported. Fasto TG100 isthick paste and can be easily applied with the helpspatula. Fasto TG100 has very good thermalconductivity with better electrical insulation andweatherability. Its performance at high temperature isalso excellent.TYPICAL APPLICATIONSFasto TG100 , thermally conductive paste, is very usefulwhere continuous heat transfer at elevated temperatureis required. It fills the air gap between contact surfaceand ensures quick heat dissipation. Fasto TG100 isgenerally used during assembly of LED lights and otherelectronic & electrical devices.PROPERTIES OF UNCURED MATERIALValueChemical type ProprietaryColour WhiteSpecific Gravity (g/ml) 1.93Thermal conductivity (W/m-k) 1.1Operating TemperatureContinuous (°C) -50 to 200Intermittent (°C) ~250Breakdown Voltage (kV/mm) > 5.1Shelf life (months) 12DIRECTIONS FOR USERemove all the rust, scale, dirt, dust, grease, oil, releaseagents, or other contaminants from the contact surfaces.Surfaces can also be cleaned using suitable Fastocleaner. Apply Fasto TG100 evenly with spatula suchthat no air remains between heat emitting surface andheat radiating contact surfaces. Apply Fasto TG100 in sufficient quantity and wipe out the excessive quantity.Excess quantity application is avoidable.Application temperature should be between 5°C and40°C and optimum temperature range is 15°C to 25°C.GENERAL INFORMATIONSAFETY PRECAUTIONSAvoid breathing of vapors. Forced local exhaust isrecommended to effectively minimize exposure. NIOSHapproved, organic vapor respirators and forced exhaustare recommended in confined areas, or when conditions(such as sanding, etc) may cause high vaporconcentrations.For safe handling of this product consult the MaterialSafety Data Sheet.StorageOptimal storage conditions are between 15°C and 25°C.Storage outside this temperature range can adverselyaffect product properties and may affect the stated shelflife.Packaging500 g, 1 kgLIMITATIONSThis product is not recommended for use in pure oxygenand/or oxygen rich systems and should not be selectedas a sealant against chlorine or other strong oxidizingmaterialsDATA RANGESThe data contained in this data sheet may be reportedas typical value and/or range. Values are based onactual test data and are verified on a regular basis.NOTESThe information contained herein is produced in goodfaith and is believed to be reliable but is for guidance only. Fasto India and its agents cannot assume liabilityor responsibility for results obtained in the use of itsproduct by persons whose methods are outside orbeyond our control. It is the user's responsibility todetermine the suitability of any of the products andmethods of use or preparation prior to use mentioned inour literature and furthermore the user's responsibility toobserve and adapt such precautions as may beadvisable for the protection of personnel and property inthe handling and use of any of our products.

Fasto SP110T is two part high performance non corrosive transparent silicone based potting compound. Fasto SP110T is specially formulated for various applications where flexible & transparent potting is very imported during assembly. Due to flexibility & low hardness, the potting can be removed for repairing of circuits/components. Fasto SP110T is flowable compound and can be easily used. Fasto SP110T offers good electrical insulation and weatherability. Its performance at high temperature is also excellent. TYPICAL APPLICATIONS Fasto SP110T is flexible potting compound. It is very useful where protection of circuits/components from moisture & dust is important. It widely finds its application on LED based lights, automotive lights and other electrical appliances. It can seal substrates like metals, glass and various plastics (like PC, ABS, AS, PBT, etc).

Fasto SM30 is a one-part UL certified, PV Grade, all weather, highly flexible, neutral cure, non-corrosive RTV Silicone Adhesive Sealant. Being non-corrosive, it does not corrode circuit & contacts. It has excellent resistance to weathering, UV Radiation, vibration, moisture, ozone, air borne pollutants, temperature extremes, cleaning detergents, etc. and ensures that it lasts the life of panel. UL File No. E526945. Fasto SM30 has passed RoHS. TYPICAL APPLICATIONS Fasto SM30 is suitable for bonding & sealing aluminium, glass, plastic & other engineering substrates of Solar Panels. It is Its high resilience ensures better expansion & contraction management due to extreme weather conditions. Also, it does not corrode connections in JBs.