Born2BondTM Light Lock MV is a low-odor, low-blooming, dual curing (contact and lightcuring), cyanoacrylate adhesive. It is designed for bonding applications that require fast fixturing coating or surface cure. The UV- and visible-light cure sensitivity allows rapid bonding through transparent parts and quick curing of light-exposed bulk or surface-coated areas, while the instant bonding capability ensures cure between opaque substrates (contact cure). KEY FEATURES → Dual cure formulation: instant and photo-cure → Fixture time in 60 s (without light exposure)* → Can be cured with visible and UV-LED light <5 sec → Long open time without activation → Dry to touch, tack free surface cure → Cure-on-demand of excess material released from bondlines → Bonds, fills, reconstructs and coats → Low odor, low blooming → Available in a range of viscosities: MV, HV and Gel

Fasto UV98E is a single component, general purpose,very low viscosity and economic grade UV adhesive thatcures to give a clear, flexible bond when exposed toUVA-light. It is especially suited for decorative glassbonding. The low viscosity of UV98E means it can wickinto preassembled parts.TYPICAL APPLICATIONSFasto UV98E is general purpose UV adhesive that hasbeen developed for bonding glass where non yellowing,transparent bonding is required.It is mainly developed for glass furniture industry wherehigher precision and transparency is required.PROPERTIES OF UNCURED MATERIALValueChemical type Urethane acrylic esterAppearance ClearSpecific Gravity 1.03Viscosity cPs1Typical Value 57Fixture Time2 (secs) 5Depth of Cure3 (mm) 2Compress Shear Strength4, N/mm2Glass 10Refractive Index 1.35Hardness ShoreD 48Shelf Life @ 21°C (months) 12Operating Temperature Range (°C)Continuous -50 to +110Intermittent -50 to +1301 Brookfield LVF, Spindle2 , 30rpm2 Glass slide fixture 10mW/cm2 @ 365 nm3 Cured for 30 secs @ 10mW/cm2 @ 365 nm4 Based on ASTM D2095-69, 180 secs cure @ 20mW/cm2 TYPICAL CURING PERFORMANCEGlass Slide Fixture Time in seconds, using Hg VapourLamp:10mW/cm2 <530mW/cm2 <3The rate of cure, depth of cure and surface tack of thecured adhesive will depend on the intensity of the UVlight, exposure time, and spectral output of the UV lightsource and light transmittance of the substrates to bebonded.Depths of cure up to 8mm can be achieved with highintensity lamps and long cure times. To achieve a fast,controlled, reproducible cure performance, the use ofhigh quality UV lamps is recommended.Cure Speed vs. IntensityFasto UV98E can be cured using sunlight. However, fora controlled, repeatable cure, UV lamps should be used.Cure speed vs. bond gapFasto UV98E is designed for bonding closely fitting glassand metal parts. UV98E can be used to a maximumdepth of ~3mm.CURING MECHANISMFasto UV98E is formulated to cure when exposed to UVradiation of 310nm or above.Chemical / Solvent ResistanceFasto UV98E exhibit excellent chemical resistance tomost oils and solvents including alcohols, methylatedspirit water. Fasto UV-curing adhesives are notrecommended for use in pure oxygen or chlorine lines.DIRECTIONS FOR USEFasto UV98E is very sensitive to UV-light. The adhesivesshould be applied to clean, dry parts. Ensure parts are clean, dry and free from oil and grease. Apply adhesiveto one surface. Once the adhesive is applied, the partscan be positioned correctly and then exposed to UV-lightto initiate curing. Ensure that the entire bond is exposed.Product can be hand applied from the bottle.Dispensing systems are also available for high volumeassembly applications. Feed lines for the dispensingsystem must have black, UV-opaque tubing to avoidadhesive curing in the lines. Please contact your Fastorepresentative for further advice on dispensing solutions.GENERAL INFORMATIONFor safe handling of this product consult the MaterialSafety Data Sheet.StorageStore in a cool area and out of direct sunlight.Refrigeration to 5°C gives optimum storage stability.PackagingBottles: 100 g, 250 g and 1 kg. Available in bulk for usewith dispensing system.Please note: When packed an air space above theProduct is vital to maintain stability.DATA RANGESThe data contained in this data sheet may be reportedas typical value and/or range. Values are based onactual test data and are verified on a regular basis.NOTESThe information contained herein is produced in goodfaith and is believed to be reliable but is for guidanceonly. Fasto India and its agents cannot assume liabilityor responsibility for results obtained in the use of itsproduct by persons whose methods are outside orbeyond our control. It is the user's responsibility todetermine the suitability of any of the products and methods of use or preparation prior to use mentioned in

Then there are polyurethane casting resins. They are fast setting and our product offerings do not need a respirator as they are very low in odor emission. These polyurethane casting resin products are two-part, 1-to-1 mix ratio formulas that set from 5 to 20-minutes. The two varieties offered here are opaque and a water clear resin. The opaque resins set to an ivory color in approximately 5-8 minutes. The clear casting resins require more setting time up to about 25-minutes. The advanced formula clear resins set with fewer air bubbles than most available formulas. We even offer a unique polyesher resin formula that will expand (point up) your castings up to 160% However, no water clear polyurethane casting resin is completely bubble free. Therefore, the use of a pressure pot is recommended to perfect the casting without bubbles. The advantage of polyurethane resins over polyester resins is that these formulas are very low in odor compared to carcinogenic producing smells of polyester resins.

Fasto LockSeal HS is high strength, anaerobic thread locker & sealant. LockSeal HS cures when confined in the absence of air on close-fitting metal surfaces. LockSeal HS is slightly oil tolerant, so it will bond some ‘as received' parts, but best results are obtained with clean substrates. LockSeal HS to be used for locking & sealing where high strength opening is required. LockSeal HS prevents corrosion of assembled parts.TYPICAL APPLICATIONSFasto LockSeal HS is suitable for most medium and coarse threads. Fasto LockSeal HS is formulated to lock & seal all metric and imperial nuts and bolts, preventing vibration loosening and leakage through the threads. LockSeal HS is typically used in crushers, diesel generators, agricultural machines, Hydraulic assemblies, heavy engineering machineries and many more industrial & automobile assemblies.TYPICAL APPLICATIONSFasto LockSeal HS is suitable for most medium and coarse threads. Fasto LockSeal HS is formulated to lock & seal all metric and imperial nuts and bolts, preventing vibration loosening and leakage through the threads. LockSeal HS is typically used in crushers, diesel generators, agricultural machines, Hydraulic assemblies, heavy engineering machineries and many more industrial & automobile assemblies.TYPICAL CURING PERFORMANCECure speed vs. Temperature All figure relating to cure speed are tested at 21°C. Lower temperatures will result in slower cure. Heating the assembled part accelerates the curing process. Activator Fasto AP49 should be used when the temperature is less than 5°C. Cure speed vs. bond gap The size of the bond gap greatly affects the speed of cure of anaerobic adhesives. Bond gap varies with thread type and size of the fastener. The larger the gap between surfaces, the slower the cure speed. Maximum recommended gap for Fasto LockSeal HS is 0.15mm. Cure speed vs. Substrate Cure speed and strength vary according to the substrates. When used on mild steel and brass components Fasto LockSeal HS will reach full strength more rapidly than on more inert materials such as stainless steel and zinc dichromate. Anaerobic Adhesives only cure in the absence of air with metal part activation. Cure speed vs. Activator Where speed is too slow or the bond gap is very large, Fasto AP49 Activator may be used to accelerate cure speed. The use of an accelerator may reduce bond strength up to 30%. Fasto recommends testing on the parts of measure the effect. TYPICAL ENVIRONMENTAL RESISTANCE Hot strength Fasto LockSeal HS is suitable for use at temperatures up to 150°C. At 150°C the bond strength will be ~45% of the strength of at 21°C.Heat ageingFasto LockSeal HS retains over 90% full strength when heated to 100°C for 90 days then cooled and tested at 21°C. Chemical / Solvent Resistance Fasto LockSeal HS exhibit excellent chemical resistance to most oils and solvents including motor oil, leaded petrol, brake fluid, acetone, ethanol, propanol and water. Anaerobic adhesives and sealants are not recommended for use in pure oxygen and chlorine lines .

With the valuable assistance of a skilled team of professionals, we are offering an extensive range of high quality UV Adhesive. The entire range of adhesive is made up of premium quality chemical compounds and modular technology under the guidance of skilled professionals as per the set industrial norms. Moreover, this adhesive is widely used in various optical industries and medical technology field. Our offered adhesive is made available in various packaging options for our clients at affordable prices. Fasto UV92 is high performance, very high strength and very low viscosity UV adhesive. It wicks between parts to be bonded. It is suitable for bonding decorative and structural glass.

Fasto UVM 21 backed ourselves with sound amenities and talented personnel, we have emerged as one of the leading firms of superior quality of UV Adhesive that provides seal against air, steam moist, fluids and lubricants. This adhesive is processed by using quality tested chemicals and sophisticated tools under the guidance of skilled professionals. Clients can avail this adhesive in bulk quantities to meet the exact requirements of the clients' specifications. Fasto UVM21 is high performance very and high strength medical grade UV adhesive. It is suitable for bonding various medical devices and grades of plastics like polycarbonate, acrylic, thermoplastics, etc Features: Very high strength Medical grade Long lasting adhesiveness Can stand with high temperature Easy to apply

Nail-free adhesives are heavy-duty construction glues designed to bond materials like wood, metal, and tiles without drilling or screws. These adhesives often feature “instant grab“ technology, which holds objects in place almost immediately, though full curing typically takes 24 hours.

Description • Hybrid adhesive sealant based on MS base. • Ultra transparent, crystal joint and free of isocyanates and solvents • excellent adhesion to wide range of construction and automotive substrates • Adheres without primer to most of the substrates. • Works on damp condition, UV resistance and Paintable • Neutral, non-corrosive and applicable on alkaline surface • Suitable for both internal and external applications, odourless and chemical resistance • Bonding skirting-boards, panels, plates made of synthetic materials, glaze, terracotta, elements made of synthetic materials, wood, metals, metal plates, for all types of surfaces in building such as brick, concrete, gypsum, plasters • Shore A hardness: 45 • Skin formation time: 5-50 minutes • Product meets requirements of EN 15651-1:2012 F-EXT-INT-CC • Product meets requirements of EN 15651-3:2012 S Class S 2

Backed ourselves with sound amenities and talented personnel, we have emerged as one of the leading firms of superior quality of UV Adhesive that provides seal against air, steam moist, fluids and lubricants. This adhesive is processed by using quality tested chemicals and sophisticated tools under the guidance of skilled professionals. Clients can avail this adhesive in bulk quantities to meet the exact requirements of the clients' specifications. Fasto UVM21 is high performance very and high strength medical grade UV adhesive. It is suitable for bonding various medical devices and grades of plastics like polycarbonate, acrylic, thermoplastics, etc Features: Very high strength Medical grade Long lasting adhesiveness Can stand with high temperature Easy to apply