http://WWW.INDUSTRIALADHESIVES.IN
INDUSTRIALADHESIVE 56cb05019ec6680814072dec False 273 46
OK
background image not found
Found results for
'pvc'
One Component Polyurethane Adhesive INR   0 INR  0
-NaN%

One Component Polyurethane Adhesive

1-part polyurethane adhesive that hardens by humidity or spraying with a fine water mist. Good relationship between open time and press time. LOCTITE UR 7221 is a solvent-free, moisture curing one component adhesive based on polyurethane. Designed for manufacturing of sandwich elements of porous substrates, which contain humidity. The substrates can be bonded to one another or to metals, laminated panels, various plastics, rigid foam made of polystyrene, polyurethane, PVC and others. At room temperature and the required humidity in the joint sufficient strength will be obtained after approximately 2 to 4 hours. For faster curing LOCTITE UR 7221 can be cured in a heated press. Maximum temperature must not exceed 70°C.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Nail Free Neoprene Adhesive INR   0 INR  0
-NaN%

Nail Free Neoprene Adhesive

• One-component mounting adhesive based on synthetic rubber in organic solvents. • For bonding of wide range of building materials to most typical surfaces, such as: concrete, plaster, chipboard, wood, plaster board, brick • Bonding of baseboards, plinths, doorsteps, floor panels, ceramic tiles • Bonding decorative elements made of wood, gypsum, cork, chipboard, metal, stones, foamed polystyrene • Bonding of mineral and glass wool • Clamping of carpets and PVC floor coverings • Colour: biege • Solid content: 75% • Density [g/ml]: 1,25 ± 0,05 • WorkIing time (depending on ambient conditions): 10-15 minutes

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Nail Free Adhesive INR   0 INR  0
-NaN%

Nail Free Adhesive

• One-component mounting adhesive based on synthetic rubber in organic solvents. • For bonding of wide range of building materials to most typical surfaces, such as: concrete, plaster, chipboard, wood, plaster board, brick • Bonding of baseboards, plinths, doorsteps, floor panels, ceramic tiles • Bonding decorative elements made of wood, gypsum, cork, chipboard, metal, stones, foamed polystyrene • Bonding of mineral and glass wool • Clamping of carpets and PVC floor coverings • Colour: biege • Solid content: 75% • Density [g/ml]: 1,25 ± 0,05 • WorkIing time (depending on ambient conditions): 10-15 minutes

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
SYNTHETIC RUBBER ADHESIVE INR   0 INR  0
-NaN%

SYNTHETIC RUBBER ADHESIVE

SPEB-7 Premium SR-911 is a high bond multipurpose adhesive with a high cohesive strength. Applied in the below industries and many more where the bond strength required is high or the application is critical. cohesive strength. Applied in the below industries and many more where the bond strength required is high or the application is critical Application: Foam / rubber foam / rexine / leather / fibre / glass / ceramic/ Coir / canvas / wood / plywood / metal / veneer /Laminated plastics / Cork / wood / chipboard / concrete / stone to each other PVC flooring / Woven carpets/ Vinyl Flooring / vinyl skirting on the wall Cloth to wood/ aluminum used for making gift/ jewelry boxes. Quick and strong bonding for Exhibition stands installation Products also find usage in Car & Gus Interiors Application Industries: Laminate to Wood Plywood bonding Carpet Industry Footwear Industry Automobile Industry Exhibition Stand Building Method of Use: Ensure that the surface to be bonded is clean and dry. Clean the surface thoroughly to remove any dirt, grease etc. Apply the adhesive on both surfaces evenly and allow drying for 5-10 mins or until just ‘c*’y to touch". Now join both surfaces and press well for about 6-8 hours to get a strong and perfect bond. Care should be taken to avoid trapping of air during joining Note: Workable bond strength of the joint will be achieved after sometime, but maximum strength will occur only after the solvent has completely evaporated which takes between 12-24 hours depending on the porosity of the surface Precautions: SPB-7 PREMIUM SR-911 should be stirred well before use. The lid of the container must be tightly closed after use and should be kept away from heat and direct sunlight.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
GP Silicone INR   0 INR  0
-NaN%

GP Silicone

BOSS 122 RTV Silicone Sealant is an one part acetoxy cure adhesive sealant that is suitable for general construction sealing and adhesive applications. This product will adhere to clean metal, glass, many types of wood, silicone resins, vulcanized silicone rubber, ceramics and plastic surfaces. A primer may be required for optimum adhesion to some substrates. Cured sealant stays rubbery from -60°F to 400°F. BOSS 122 RTV silicone sealants ideally suited for sealing , glass windows, shopfront, aluminium joints, showcases, bus body building and automobiles. BENEFITS: Ease of use, one-part sealant, no mixing required. Good weatherability Virtually unaffected by sunlight, rain, ozone, and temperature extremes. Long life reliability, cured sealant stays rubbery from -25 to 110°C without tearing,cracking, drying out, or becoming brittle. Wide temperature gunnability can be applied in any season. Typical Properties Uncured Specific Gravity 0.97±2 Colors Clear, White, Black Sag/Slump NIL Tack-Free Time 10-15 min CureTime at 75°F (24°C) and 50% RH (3/8¢ thickness) 24 hours Extrusion Rate 275 g/min Cured Physical Elongation >400% Durometer Hardness, Shore A, points 17 Tensile Strength, Mpa 1.8 Dynamic Movement Capability Cycled at 1/8' hr.,1/8min.% ± 25 silicone sealant, high flow silicone sealant, ge sealant marine silicone, drum pump silicone sealant,,black silicone sealant waterproof, silicone sealant specialists, Anabond 666, silicone glazing sealant, food grade silicone sealant, silicone sealant specialties, silicone sealant drying time, structural silicone sealant, silicone rubber sealant, silicone sealant for fiberglass, aquarium silicone sealant, silicone boat sealant, flexible sanitary silicone sealant, high temp red Rtv silicone sealant, silicone sealant applicator tool, silicone joint sealant, silicone sealant for upvc windows, service temperature of silicone sealant, Silicone Sealant, Permatex High Temperature RTV Red, Boss 395 High Temperature Resistant Silicon Sealant, Boss 389 Weather Sealant, Silcon Sealant for ACP, Aluminum Composite Panel Sealant, Glass Sealant, Water Preventive Silicon, Dow Corning 732 siilcon Sealant, Engine Gasket Maker, Gear Box Sealant, Car Glass Silicon, Car Glass Adhesive, Automobile Silicon, Nail Free Silicon Sealant, Mirror Silicon Sealant, Mirror Adhesive, white Silicon Sealant, Black Silicon Sealant, H. T. Silicon Sealant, Anabond Silicon Sealants.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
1
false